用于Atom Delta的E3DV6模塊

The parts you need. 1 cnc hub lower 1 pcs Atom 2 E3D_V6_1.75mm 1 pcs 3 臺達 fan 3510 12V 2 pcs 4 臺達 fan 3010 12V 1 pcs 5 endstop 1 pcs 歐姆龍機械式 6 E3D V6 carriage for Atom 1 pcs printing parts 7 E3D_clamp F for Atom 1 pcs printing parts 8 E3D_clamp R for Atom 1 pcs printing parts 9 Fan shield for atom 1 pcs printing parts 10 Fan shield for atom (mirror) 1 pcs printing parts 11 wind shield for rear fan 1 pcs printing parts 12 spring_0.5-5-25 (線徑-外徑-長) 4 pcs 13 M2.5X10 6 pcs 14 M3X8 2 pcs 15 M3X20 4 pcs 16 M3X30 1 pcs 17 M3X40 3 pcs 18 M3 nut 防鬆螺帽 9 pcs 19 M3 nut 一般螺帽 2 pcs 20 M3X20 Flat head screws 4pcs Printing part ABS is better! 0.2 LH in normal, might smaller for carriage. Assembly tip Two 3510 Fa might with M2.5X10 2pcs each(total 4pcs). With screw glue in hole(carriage) is better. 3510 側吹風扇配合4顆M2.5螺絲鎖附前請上螺絲膠(至鎖合的孔裡) When E3DV6 module (with Clamp -F-R and endstop) assemble to carriage, 3 boss and hole should make it as smooth as possible. 整個噴頭模組與Carriage組裝時，請確認三個導柱與孔相對移動盡可能順滑(配合孔柱請上潤滑油) 噴頭模組組裝時，因空間關係使用一般M3螺帽需上螺絲膠!