Because of some problems with the last post, here is a re-upload.
And new improvements are coming.
The new one will have 4 HDD drive bays and use a swappable design.
But there are some problems at the moment, I will update it when it is solved!
Here is the current 3D preview (Fusion ITX-ver2) .
中文介紹在下方
This is a Modular Computer Case V2 remix for NAS.
After modification, it can hold three 3.5" Hard Drive and a 1U flex power supply.
I also added two 80mm fa on the side and moved the motherboard down to improve the airflow of the chassis.
The Threaded Ierts used here are [M3x6x4.5 mm] (maximum outer diameter is 4.5).
Note that HDD brackets are fragile and i recommended to apply epoxy resin on the outside to strengthen the structure.
The screws you need are:
M3x6x4.5 mm Threaded Ierts
M3x10 flat head screw
M3x6 flat head screw
6-32 UNC computer case screws
Future Improvements:
Low-Profile PCIE slot
Strengthen HDD bracket strength
File description:
The ITX.zip file contai two folde, STL and STEP.
The contents are the same design, depending on which file format you want to use.
p.s. :5._Topplate_Case_ITX_V2 needs two pieces, one for the bottom of the MB case and the other for the top of the NAS case.
中文:
這是一個ITX 的NAS機箱,Remix來自 Modular Computer Case V2
經過我的修改,我將HDD 位置修改為3個槽位,並且稍微移動,讓左側可以裝下小1U的電源供應器,右側可以裝下2個8公分的風扇,讓HDD 有更好的散熱環境。並且將主機板位置移動到下方,讓上方2個8公分風扇吹到下方主機板。
這邊全部都是使用 M3x6x4.5 的熱壓螺母,壓的時候注意孔內是否有融化的塑膠並清掉,否則會鎖不進去或是卡住。
這邊需要注意: HDD 那個板子非常容易斷掉,我建議在外面塗上AB膠或是瞬間膠,去強化外殼。
使用的螺絲規格:
M3x6x4.5 mm 熱壓螺母
M3x10 平頭螺絲
M3x6平頭螺絲
普通機箱用的螺絲 (建議長一點,因?yàn)樾?U電源是使用電腦機機殼用的螺絲 10mm 應該就夠了)
未來改進:
1.改善HDD支架強度問題
2.新增半高PCIE卡的槽位
文件說明:
ITX.ZIP 這格檔案內已經有STEP 格式 和STL 格式的檔案,我也有附上 fusion 360格式的檔案,按自己的需求使用即可。
p.s. :5._Topplate_Case_ITX_V2 這個檔案需要兩片,一片是給主板那個殼的下方,另一個是用在HDD 上方。其餘的印一個就可以了